Transceptor de chip único de capa física Fast Ethernet Davicom DM9161BEP 10/100 Mbps

Davicom

DM9161BEP

MII, RMII

SMT

25+

Taiwan, China

Network Interface Adapter, Surveillance Camera, Embedded System, Ethernet Hub, Ethernet Switch

PHY

DM9161B Series

DAVICOM's DM9161B is a physical layer, single-chip,and low power 100BASE-TX/10BASE-T transceiverspecifically designed for consumer electronics, industrial andenterprise applications. For the media usage, it providesa direct interface either to Unshielded Twisted PairCategory 5 Cable (UTP5) for 100BASE-TX FastEthernet, or UTP5/UTP3 Cable for 10BASE-TEthernet.Through the Media Independent Interface (MII),DM9161B not only connects the Medium AccessControl (MAC) layer but also ensur a high interoperability from different vendors.TheDM9161B uses a CMOS process which hasadvantages of power consumption saving and highperformance .It contains the entire physical layer functions of100BASE-TX which is defined by IEEE802.3u,including the Physical Coding Sub layer (PCS),Physical Medium Attachment (PMA), Twisted PairPhysical Medium Dependent Sub layer (TP-PMD),10BASE-TX Encoder/Decoder (ENC/DEC), andTwisted Pair Media Access Unit (TPMAU).The DM9161B provides a strong support for theauto-negotiation function, utilizing automatic mediaspeed and protocol selection. In the bargain, , theDM9161B needs no external filter to transport signalsto the media in 100BASE-TX or 10BASE-T Ethernetoperation because of the built-in wave shaping filter

48-pin LQFP 0.18um process

Fully comply with IEEE 802.3 / IEEE 802.3u 10Base-T/100Base-TX, ANSI X3T12 TP-PMD 1995 standard, Support HP MDI/MDI-X auto crossover function (HP Auto-MDIX), Support Auto-Negotiation function, compliant with IEEE 802.3u, Fully integrated Physical layer transceiver, On-chip filtering with direct interface to magnetic transformer, Selectable repeater or node mode, Selectable MII or RMII (Reduced MII) mode for 100Base-TX and 10Base-TX, Selectable MII or GPSI (7-Wired) mode for 10Base-T, Selectable full-duplex or half-duplex operation, MII management interface with maskable interrupt output capability, Provide Loopback mode for easy system diagnostics, LED status outputs indicate Link/Activity, Speed 10/100 and Full-duplex/Collision, Support Dual-LED optional control, Single low power supply of 3.3V with an advanced CMOS technology, Lower power consumption modes: Power Reduced mode (cable detection), Power Down mode, Selectable TX drivers for 1:1 or 1.25:1 transformers for additional power reduction (1:1 transformers only when HP Auto-MDIX Enable), Compatible with 3.3V and 5.0V tolerant I/Os, Pin-to-pin compatible with DM9161A, DSP architecture PHY Transceiver, 48-pin LQFP, 0.18μm process