Controlador de Ethernet rápido Davicom DM9621AINP MAC PHY USB2.0 a 10/100Mbps

Name: Controlador de Ethernet rápido Davicom DM9621AINP MAC PHY USB2.0 a 10/100Mbps
Brand: Great International CORP.
SKU: 11000026022429
Price: 2.5 USD
Availability: InStock

Aún no hay reseñas

Great International CORP.

1 año

Atributos

DavicomMarca

DM9621AINPNúmero de Modelo

Ethernet PHY, USB PHYInterfaz

SMTTipo de montaje

25+Código de fecha de fabricación

Taiwan, ChinaLugar del origen

Aplicación:Network Interface Adapter, Surveillance Camera, Embedded System, Ethernet Hub, Ethernet Switch

Tipo:USB PHY, PHY

Serie:DM9621A series

Descripción:The DM9621A USB to 10/100Mbps Fast Ethernet controller is a high performance and highly integrated ASIC with embedded SSRAM for packet buffering. It enables low cost and affordable Fast Ethernet network connection to desktop, notebook PC, and embedded system using popular USB ports. It has an USB interface to communicate with USB host controller and is compliant with USB specification V1.0, V1.1 and V2.0. It implements 10/100Mbps Ethernet LAN function based on IEEE802.3, and IEEE802.3u standards. DM9621A integrates an on-chip 10/100Mbps Ethernet PHY to simplify system design and provides an optional Reduce media-independent interface (RMII).

Tipo de embajaje:48-pin QFN

Función:USB Interface USB 2.0 Device, Support 12Mbps full speed operation, Support 480Mbps high speed operation, Support suspend mode and remote wake-up resume, Support USB standard commands, Support vendor specific commands, Efficient TX/RX FIFO auto management, Embedded SRAM for RX/TX packet buffering, Supports 4 endpoints (Control, Interrupt, Bulk_IN, Bulk_OUT), Supported Classes: USB Common Class, USB Communications Class Ethernet Support IEEE 802.3u 100BASE-TX and IEEE 802.3 10BASE-T standards, Support IEEE 802.3x flow control function for 100BASE-TX and 10BASE-T, Support IEEE 802.3az Energy Efficient Ethernet (EEE), Built-in 10/100Mbps Fast-Ethernet PHY with Auto-MDIX, Supports RMII interface or 8-pin GPIO, Support Auto-Negotiation function, Back Pressure Mode for Half-Duplex mode flow control, PAUSE frame for Full-Duplex flow control, Support power management: Wake-on-LAN, ARP/NDP Offload, Supports GPIO, wakeup frame, link status change, and Magic Packet events for remote wake-up, Support TCP/UDP/IPv4 checksum offload checking and generating EEPROM Interface Supports 128/256/512 bytes (93C46/93C56/93C66) of serial EEPROM (for storing USB Descriptors), 93C46/93C56/93C66 auto-detection

Temperatura de funcionamiento:0~70

Velocidad de datos:10/100Mbps

PAQUETE/cubierta:48-pin QFN

-Tensión de alimentación:3.3V, I/O 3.3V to 5V

Protocolo:IEEE 802.3, IEEE 802.3u

Características clave

Marca

Davicom

Número de Modelo

DM9621AINP

Interfaz

Ethernet PHY, USB PHY

Tipo de montaje

SMT

Código de fecha de fabricación

25+

Lugar del origen

Taiwan, China

Aplicación

Network Interface Adapter, Surveillance Camera, Embedded System, Ethernet Hub, Ethernet Switch

Tipo

USB PHY, PHY

Serie

DM9621A series

Descripción

The DM9621A USB to 10/100Mbps Fast Ethernet controller is a high performance and highly integrated ASIC with embedded SSRAM for packet buffering. It enables low cost and affordable Fast Ethernet network connection to desktop, notebook PC, and embedded system using popular USB ports. It has an USB interface to communicate with USB host controller and is compliant with USB specification V1.0, V1.1 and V2.0. It implements 10/100Mbps Ethernet LAN function based on IEEE802.3, and IEEE802.3u standards. DM9621A integrates an on-chip 10/100Mbps Ethernet PHY to simplify system design and provides an optional Reduce media-independent interface (RMII).

Tipo de embajaje

48-pin QFN

Función

USB Interface USB 2.0 Device, Support 12Mbps full speed operation, Support 480Mbps high speed operation, Support suspend mode and remote wake-up resume, Support USB standard commands, Support vendor specific commands, Efficient TX/RX FIFO auto management, Embedded SRAM for RX/TX packet buffering, Supports 4 endpoints (Control, Interrupt, Bulk_IN, Bulk_OUT), Supported Classes: USB Common Class, USB Communications Class Ethernet Support IEEE 802.3u 100BASE-TX and IEEE 802.3 10BASE-T standards, Support IEEE 802.3x flow control function for 100BASE-TX and 10BASE-T, Support IEEE 802.3az Energy Efficient Ethernet (EEE), Built-in 10/100Mbps Fast-Ethernet PHY with Auto-MDIX, Supports RMII interface or 8-pin GPIO, Support Auto-Negotiation function, Back Pressure Mode for Half-Duplex mode flow control, PAUSE frame for Full-Duplex flow control, Support power management: Wake-on-LAN, ARP/NDP Offload, Supports GPIO, wakeup frame, link status change, and Magic Packet events for remote wake-up, Support TCP/UDP/IPv4 checksum offload checking and generating EEPROM Interface Supports 128/256/512 bytes (93C46/93C56/93C66) of serial EEPROM (for storing USB Descriptors), 93C46/93C56/93C66 auto-detection

Temperatura de funcionamiento

0~70

Velocidad de datos

10/100Mbps

PAQUETE/cubierta

48-pin QFN

-Tensión de alimentación

3.3V, I/O 3.3V to 5V

Protocolo

IEEE 802.3, IEEE 802.3u